China Xiamen Changshun Auto Parts Co., LTD Company Cases

As one of the wearing parts in the auto parts, the rubber strip needs to be replaced regularly. However, some wipers have problems after a short time of use and you don't want to buy new ones. How to repair the strip of the wiper blade? We can repair it according to the corresponding repair method below, and then reuse it.   1. The rubber strip is stained If your wipers often work in an environment full of dust and sand, then your tape is likely to be contaminated by these dust and sand. The surface of the rubber strip is not smooth, and when it is attached to the windshield, it can not play a good wiping effect. We just need to use a clean wet towel to gently wipe off the stain on the tape, and then use it again.   2. The rubber strip is aged or damaged When our wiper is exposed to sunlight and rain for a long time, the rubber strip will gradually begin to harden, and even cracks and cracks appear on the surface of the rubber strip. For the rubber strip that is not seriously aged, we only need to use a piece of fine sandpaper to grind back and forth in the place where the rubber strip has gaps or cracks (note! Do not use too much force when sanding, and the sandpaper method cannot be used often. Excessive grinding will damage the surface of the strip and produce abnormal noise when the wiper is working). If the crack of the rubber strip is large, we recommend that you replace the rubber strip or buy a new wiper.   3. Front windshield is not clean Sometimes the reason why the wiper is not clean is not because of the wiper itself, but there may be problems elsewhere, such as foreign objects and oil film on the windshield. In this case, we just need to buy a bottle of oil film remover to solve the problem. Although the rubber strip can be temporarily repaired and reused, in order to drive safety, we recommend that you directly replace the new one to better ensure your driving safety.

Some people think that the wiper blade is found to be working, but there will still be some dead corners on both sides of the front stop, which is difficult to scrape. Is it not the longer the length of the wiper, the larger the area to be scraped, the better the driver's field of view.   In fact, the wiper blade is not the longer the better. Because, although the length of the wiper blade can increase the scope of visual field, it will also increase the burden of the wiper and the wiper rod. Of course, the appropriate extension can be, but to ensure normal work, must not put the cart before the horse, blindly pursue the degree of the wiper blade, so as not to hinder the normal work of the wiper.

Wiper blades did not appear with the birth of the car, so at the beginning of the birth of the car, people did not pay much attention to this small part. Until a series of traffic accidents caused by sight problems, people gradually realized the importance of wiper blades, which led to the emergence of manual wipers and electric wiper wipers. The development history of wiper blades can be traced back to more than 100 years ago. Its technology and performance have been constantly explored and improved. Now there are innovative boneless wipers. Compared with traditional wipers, boneless wipers have more advantages and features.     The design of the wiper blade itself is closely related to the windshield. When car windshields first appeared, their flat surfaces were not curved like modern windshields, so windshields had to find flatter wipers to match (i.e., traditional wipers with bones). Nowadays, newly designed boneless wipers match the curvature of modern windshields, so boneless wipers have become the choice of more and more car users. The wiper's wiper coverage of the windshield depends on the number of pressure points designed inside the wiper. The more pressure points, the greater the pressure when the wiper wipes, the cleaner the scraping effect. Traditional wipers typically have only six to eight pressure points, while boneless wipers have an unlimited number of pressure points. Numerous pressure points ensure that the entire wiper blade is in full contact with the windshield, ensuring the wiper effect. The more pressure points the wiper has, the more obvious the driving experience will be when it is used in rainy days. The following two new wipers use the number of wiper pressure points to become our popular boneless wipers in recent years.   Driving in heavy rain can be stressful, not only because of the amount of rain, but also because of the wind it brings. The traditional wiper blade has not fully considered the effect of strong wind resistance on the performance of the wiper, especially at high speed. Strong wind resistance will force the wiper and windshield to separate, and the wiper will not work properly, which can lead to accidents. The 665 composite wiper designed by Baoyi has twice the pressure points of other wipers. Combined with the double 304 stainless steel small spring and the widened and thickened DR Rubber strip, the wiper is matched to the arm and windshield, so this wiper is stable at high speeds. The all-weather design and higher performance result in higher quality wiper blades. High quality boneless wipers can be used at any time of the year and in any climate. From durable deflectors to high-strength steel and more durable rubber, high-quality boneless wipers can maintain good performance in harsh weather conditions.   Composite structure design boneless wipers (such as 665) using its DR Rubber strip flon rubber strip, not only the service life is longer than the traditional wiper blade, but also in the performance experience there is a huge difference. Now start switching from bone wipers to boneless wipers and experience the difference between bone wipers and boneless wipers.

As one of the wearing parts in the auto parts, the rubber strip needs to be replaced regularly. However, some wipers have problems after a short time of use and you don't want to buy new ones. How to repair the strip of the wiper blade? We can repair it according to the corresponding repair method below, and then reuse it.   1. The rubber strip is stained If your wipers often work in an environment full of dust and sand, then your tape is likely to be contaminated by these dust and sand. The surface of the rubber strip is not smooth, and when it is attached to the windshield, it can not play a good wiping effect. We just need to use a clean wet towel to gently wipe off the stain on the tape, and then use it again.   2. The rubber strip is aged or damaged When our wiper is exposed to sunlight and rain for a long time, the rubber strip will gradually begin to harden, and even cracks and cracks appear on the surface of the rubber strip. For the rubber strip that is not seriously aged, we only need to use a piece of fine sandpaper to grind back and forth in the place where the rubber strip has gaps or cracks (note! Do not use too much force when sanding, and the sandpaper method cannot be used often. Excessive grinding will damage the surface of the strip and produce abnormal noise when the wiper is working). If the crack of the rubber strip is large, we recommend that you replace the rubber strip or buy a new wiper.   3. Front windshield is not clean Sometimes the reason why the wiper is not clean is not because of the wiper itself, but there may be problems elsewhere, such as foreign objects and oil film on the windshield. In this case, we just need to buy a bottle of oil film remover to solve the problem. Although the rubber strip can be temporarily repaired and reused, in order to drive safety, we recommend that you directly replace the new one to better ensure your driving safety.