How to repair the strip of the wiper blade?

As one of the wearing parts in the auto parts, the rubber strip needs to be replaced regularly. However, some wipers have problems after a short time of use and you don't want to buy new ones. How to repair the strip of the wiper blade? We can repair it according to the corresponding repair method below, and then reuse it.

1. The rubber strip is stained

If your wipers often work in an environment full of dust and sand, then your tape is likely to be contaminated by these dust and sand. The surface of the rubber strip is not smooth, and when it is attached to the windshield, it can not play a good wiping effect. We just need to use a clean wet towel to gently wipe off the stain on the tape, and then use it again.

2. The rubber strip is aged or damaged

When our wiper is exposed to sunlight and rain for a long time, the rubber strip will gradually begin to harden, and even cracks and cracks appear on the surface of the rubber strip. For the rubber strip that is not seriously aged, we only need to use a piece of fine sandpaper to grind back and forth in the place where the rubber strip has gaps or cracks (note! Do not use too much force when sanding, and the sandpaper method cannot be used often. Excessive grinding will damage the surface of the strip and produce abnormal noise when the wiper is working). If the crack of the rubber strip is large, we recommend that you replace the rubber strip or buy a new wiper.

3. Front windshield is not clean

Sometimes the reason why the wiper is not clean is not because of the wiper itself, but there may be problems elsewhere, such as foreign objects and oil film on the windshield. In this case, we just need to buy a bottle of oil film remover to solve the problem.

Although the rubber strip can be temporarily repaired and reused, in order to drive safety, we recommend that you directly replace the new one to better ensure your driving safety.